A SERVICE OF

logo

Open as PDF
next previous
ES-2108 Series User’s Guide
Chapter 33 Interface Commands 235
33.3 Interface no Command Examples
Similar to the no commands in the Enable and Config modes, the no commands for the
Interface sub mode also disable certain features. In this mode, however, this takes place on a
port by port basis.
33.3.1 no bandwidth-limit
You can disable bandwidth limit on port 1 simply by placing the no command in front of the
bandwidth-limit command.
Syntax:
no bandwidth-limit ingress
no bandwidth-limit egress
An example is shown next:
• Disable bandwidth limits for incoming traffic on port 1.
sysname(config)# interface port-channel 1
sysname(config-interface)# no bandwidth-limit ingress