ES-2108 Series User’s Guide
198 Chapter 30 Introducing Commands
leave-timeout <1-16711450>
Sets the leave timeout value 13
unknown-
multicast-frame
<drop|flooding>
Sets how to treat traffic from
unknown multicast group.
13
igmp-
filtering
Enables IGMP filtering on the
switch.
13
profile <name>
start-address
<ip> end-address
<ip>
Sets the range of multicast
address(es) in a profile.
13
interface port-channel
<port-list>
Enables a port or a list of ports
for configuration. See Section
30.11.4 on page 204 for more
details.
13
spq
Sets the queuing method to
SPQ (Strictly Priority
Queuing).
13
wrr
Sets the queuing method to
WRR (Weighted Round
Robin).
13
<wt1> <wt2> <wt3>
<wt4>
Sets the weight value from 1 to
8 to each variable. These
values are used in WRR
queuing.
13
ip route <ip> <mask>
<next-hop-ip>
Creates a static route. 13
<ip> <mask>
<next-hop-ip>
[metric
<metric>] [name
<name>]
[inactive]
Sets the metric of a static route
or deactivates a static route.
13
name-server <ip>
Sets the IP address of a
domain name server.
13
address default-
gateway
<ip>
Sets the default gateway's IP
address for the out-of-band
management port.
13
address <ip> <mask>
Sets the IP address and
subnet mask of the out-of-
band management port.
13
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id>
Configures a static MAC
address forwarding rule.
13
inactive
Disables a static MAC address
forwarding rule.
13
Table 74 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
PRIVILEG
E
