ES-2108 Series User’s Guide
Chapter 30 Introducing Commands 203
ssh <socket-
number>
Allows SSH access on the
specified service port.
13
https <socket-
number>
Allows HTTPS access on the
specified service port.
13
remote-
management
<index>
Enables a specified secured
client set.
13
<index> start-
addr <ip> end-
addr <ip> service
<[telnet] [ftp]
[http] [icmp]
[snmp] [ssh]
[https]>
Specifies a group of trusted
computer(s) from which an
administrator may use a
service to manage the switch.
13
admin-
password
<pw-string>
<confirm-string>
Changes the administrator
password.
14
syslog
Enables syslog logging on the
switch.
13
server <ip-
address>
Enables syslog logging on the
specified syslog server.
server <ip-
address>
inactive
Disables syslog logging to the
specified syslog server.
13
level [0 ~ 7]
Sets the IP address of the
syslog server and the severity
level.
13
type <type>
facility [local 1
..7]
Sets the log type and the file
location on the syslog server.
13
ssh known-hosts
<host-ip>
<1024|ssh-
rsa|ssh-dsa>
<key>
Adds a remote host to which
the switch can access using
SSH service.
13
https cert-
regeneration
<rsa|dsa>
Re-generates a certificate. 13
timeout <0-
65535>
Sets the HTTPS timeout
period.
13
multi-login
Enables multi-login. 14
mvr <vlan-
id>
Enters the MVR (Multicast
VLAN Registration)
configuration mode.
See Section 30.11.6 on page
208 for more information.
13
diffserv
Enables DiffServ on the
switch.
13
Table 74 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
PRIVILEG
E
