Chapter 37 Access Control
GS1920 Series User’s Guide
301
37.6 Remote Management
Use this screen to specify a group of one or more “trusted computers” from which an administrator
may use a service to manage the Switch.
Click Management > Access Control > Remote Management to view the screen as shown
next.
You can specify a group of one or more “trusted computers” from which an administrator may use a
service to manage the Switch. Click Access Control to return to the Access Control screen.
Service Port For FTP, HTTP or HTTPS services, you may change the default service port by typing the
new port number in the Service Port field. If you change the default port number then
you will have to let people (who wish to use the service) know the new port number for
that service.
Timeout Type how many minutes (from 1 to 255) a management session can be left idle before
the session times out. After it times out you have to log in with your password again. Very
long idle timeouts may have security risks.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 147 Management > Access Control > Service Access Control (continued)
LABEL DESCRIPTION
