Chapter 8 Basic Setting
GS1920 Series User’s Guide
60
Figure 44 Basic Setting > System Info (for PoE model(s) only)
The following table describes the labels in this screen.
Table 9 Basic Setting > System Info
LABEL DESCRIPTION
System Name This field displays the descriptive name of the Switch for identification purposes.
Product Model This field displays the product model of the Switch. Use this information when searching for
firmware upgrade or looking for other support information in the website.
ZyNOS F/W
Version
This field displays the version number of the Switch 's current firmware including the date
created.
Ethernet
Address
This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
CPU Utilization CPU utilization quantifies how busy the system is. Current (%) displays the current
percentage of CPU utilization.
Memory
Utilization
Memory Utilization shows much DRAM memory is available and in use.
Name This field displays the name of memory pool.
Total This field displays the total number of bytes in this memory pool.
Used This field displays the number of bytes being used in this memory pool.
Utilization This field displays the percentage (%) of memory being used in this memory pool.
Hardware Monitor
Temperature
Unit
The Switch has temperature sensors that are capable of detecting and reporting if the
temperature rises above the threshold. You may choose the temperature unit (Centigrade or
Fahrenheit) in this field.
Temperature BOARD, MAC and PHY refer to the location of the temperature sensors on the Switch
printed circuit board.
