ZyXEL Communications GS2200-24 Manual

A SERVICE OF

next previous

Chapter 18 Port Authentication

GS2200-24 User’s Guide

164

Active Select this to permit 802.1x authentication on this port. You must first

allow 802.1x authentication on the Switch before configuring it on each

port.

Reauthenticati

on

Specify if a subscriber has to periodically re-enter his or her username

and password to stay connected to the port.

Reauthenticati

on Timer

Specify how often a client has to re-enter his or her username and

password to stay connected to the port.

Apply Click Apply to save your changes to the Switch’s run-time memory. The

Switch loses these changes if it is turned off or loses power, so use the

Save link on the top navigation panel to save your changes to the non-

volatile memory when you are done configuring.

Cancel Click Cancel to begin configuring this screen afresh.

Table 41 Advanced Application > Port Authentication > 802.1x (continued)

LABEL DESCRIPTION