![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/7/68/768d5a8c-8599-44b8-8cdf-b5b6f7476ee0/768d5a8c-8599-44b8-8cdf-b5b6f7476ee0-bgbc.png)
Chapter 23 VLAN Stacking
GS2200-24 User’s Guide
188
Click the SVLAN link in the VLAN Stacking screen.
Figure 92 Advanced Application > VLAN Stacking > SVLAN
The following table describes the labels in this screen.
23.6 Technical Reference
This section provides technical background information on the topics discussed in
this chapter.
23.6.1 VLAN Stacking Example
In the following example figure, both A and B are Service Provider’s Network
(SPN) customers with VPN tunnels between their head offices and branch offices
respectively. Both have an identical VLAN tag for their VLAN group. The service
provider can separate these two VLANs within its network by adding tag 37 to
Table 52 Advanced Application > VLAN Stacking > SVLAN
LABEL DESCRIPTION
SVLAN
ID
Enter a service provider's VLAN ID (from 1 to 4094) that should be carried in
the incoming frames received on a Tunnel Port.
Add Click Add to insert the entry in the summary table below and save your
changes to the Switch’s run-time memory. The Switch loses these changes if it
is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Index This is the index number of the entry.
SVLAN
ID
This is the service VLAN ID.
Delete Check the entry(ies) that you want to remove in the Delete column and then
click the Delete button.
Cancel Click Cancel to clear the Delete check boxes.