A SERVICE OF

logo

Chapter 6 Tutorials
GS2200-24 User’s Guide
60
on the system name, VLAN ID and port number in the DHCP request. Client A
connects to the Switch’s port 2 in VLAN 102.
Figure 27 Tutorial: DHCP Relay Scenario
6.3.2 Creating a VLAN
Follow the steps below to configure port 2 as a member of VLAN 102.
1 Access the web configurator through the Switch’s management port.
2 Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click
Apply to save the settings to the run-time memory.
Figure 28 Tutorial: Set VLAN Type to 802.1Q
VLAN 102
DHCP Server
Port 2
PVID=102
172.16.1.18
A
192.168.2.3