Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
220
32.10.3 Configure Mode
The following table lists the commands in Configuration (or Config) mode.
system-
information
Displays general system
information.
13
time Displays current system time and
date.
13
timesync Displays time server information. 13
trunk Displays link aggregation
information.
13
vlan Displays the status of all VLANs. 13
<vlan-id> Displays the status of the
specified VLAN.
13
vlan1q gvrp Displays GVRP setting. 13
port-isolation Displays port isolation setting. 13
ssh <1|2>
<[user@]dest-ip>
Connects to an SSH server with
the specified SSH version.
13
tracerout
e
<ip|host-name>
[in-band|out-of-
band|vlan <vlan-
id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet
takes to a device.
13
write memory Saves the configuration to the
configuration file the switch is
currently using.
13
<index> Saves the configuration to the
specified configuration file on the
switch.
13
Table 82 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 83 Command Summary: Configure Mode
COMMAND DESCRIPTION PRIVILEGE
admin-
password
<pw-string>
<confirm-string>
Changes the administrator
password.
14
bandwidth-
control
Enables bandwidth control. 13
bcp-
transparency
Enables Bridge Control
Protocol Transparency.
13
