Chapter 32 Introducing the Commands
GS-3012/GS-3012F User’s Guide
225
<name> inactive Enables a classifier. 13
cluster Disables cluster
management on the switch.
13
member <mac-
address>
Removes the cluster
member.
13
dhcp-relay Disables DHCP relay. 13
information System name is not
appended to option 82
information field.
13
option Disables the relay agent
information option 82.
13
igmp-filtering Clears the IGMP filtering
settings on the switch.
13
profile <name> Deletes the IGMP filtering
profile.
13
profile <name>
start-address
<ip> end-address
<ip>
Deletes a rule in the IGMP
filtering profile.
13
igmp-snooping Disables IGMP snooping. 13
ip Sets the management IP
address to the default value.
13
route <ip>
<mask>
Removes a specified IP static
route.
13
route <ip>
<mask> inactive
Enables a specified IP static
route.
13
lacp Disables the link aggregation
control protocol (dynamic
trunking) on the switch.
13
logins username <name> Removes the login account. 14
mac-filter mac <mac-addr>
vlan <vlan-id>
inactive
Enables the specified MAC-
filter rule.
13
mac <mac-addr>
vlan <vlan-id>
Disables the specified MAC
filter rule.
13
mac-forward mac <mac-addr>
vlan <vlan-id>
interface
<interface-id>
inactive
Enables the specified MAC
address, belonging to a
VLAN group (if any)
forwarded through an
interface(s).
13
mac <mac-addr>
vlan <vlan-id>
interface
<interface-id>
Removes the specified MAC
forwarding entry, belonging
to a VLAN group (if any)
forwarded through an
interface(s).
13
mirror-port Disables port mirroring on the
switch.
13
Table 83 Command Summary: Configure Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
