Chapter 8. Packet Manager
8-12 ATLAS 550 User Manual 61200305L1-1
S
TART
The fixed duration that T
EST
is not running and the DLCI is not config-
ured for continuous in-band delay measurement. To change this option,
set D
IAGNOSTIC
M
ODE
to I
N
-
BAND
D
ELAY
M
EASUREMENT
(also see In-Band
Delay Measurement on page 8-10).
C
ONT
D
LY
The fixed duration T
EST
is not running and the DLCI is configured for
continuous in-band delay measurement. The following R
ESULTS
menu
accumulates these measurements.
S
TOP
T
ST
The fixed duration T
EST
is running. The following D
URATION
field
shows the time remaining in the current test.
D
URATION
Shows the duration in seconds for the fixed-duration test.
R
ESULTS
[MN/AV/MX D
LY
]
Displays the minimum, average, and maximum delay for the delay-mea-
surement test.To display the additional test results, place the cursor over
this field and press
Enter
on the keyboard. These times are in milliseconds.
E
CHO
P
KT
T
X
Displays the total number of test packets that have been transmitted.
E
CHO
P
KT
R
X
Displays the total number of test packets that have been received.
E
CHO
P
KT
D
ROPPED
Displays the total number of packets lost in the receiving direction
(traveling from the remote ADTRAN frame relay device to the ATLAS
550).
R
MT
P
KT
D
ROPPED
Displays the total number of packets lost in the transmit direction (trav-
eling from the ATLAS 550 to the remote ADTRAN frame relay device).
M
IN
D
ELAY
Displays the minimum round trip delay for the current test period.
M
AX
D
ELAY
Displays the maximum round trip delay for the current test period.
A
VG
D
ELAY
Displays the average round trip delay for the current test.
R
ESET
C
OUNTERS
Resets the counters.
ENDPNT COUNT
Read Security: 5
Displays the total number of packet endpoints configured.
ENDPNTS SORT
Write Security: 3; Read Security: 5
Provides sorting options. SORTING
B
Y
N
AME
sorts packet endpoints alpha-
betically by name. If you do not want to sort packet endpoints, set this
option to O
FF
.
