T1 ESF CSU ACE User Manual Chapter 3. Operation
61204025L1-1B © 2004 ADTRAN, Inc 35
Selecting a Submenu Item
To select the desired submenu item (similar to selecting a Main menu item), follow these steps:
1. Use the up and down scroll keys to place the cursor on the desired menu item, in this example
1)NETWORK (NI). See Figure 3-3.
2. The unit responds by displaying the first two available data field items. The cursor is on the number of
the first item. When there are more than two data field items for the selected submenu, a down arrow
is visible on the lower right corner. See Figure 3-4.
Figure 3-4. Submenu Indicating Additional Items Not Shown
Setting/Cancelling the Data Field
Data fields available for editing are preceded by a colon (:). To set a data field, perform the following steps:
1. Press ENTER while the cursor is located on the submenu item number. The cursor moves to the data
field (to the right of the submenu item name). See Figure 3-5.
Figure 3-5. Editing a Data Field
2. Use the up and down scroll keys to scan the available value settings displayed one at a time in the
data field position.
3. When the desired value is in the data field position, press
ENTER to set the value. The unit now is set
for the value shown in the data field and the cursor moves back to the submenu item position,
indicating that the operation is complete. Another submenu field may be selected, or use
CANCEL to
return to the submenu.
Cancelling is available any time during the operation. If CANCEL is used prior to
pressing ENTER after making a data change, the original data value is restored and the
cursor returns to the submenu field.
