Chapter 3. Operation T1 ESF CSU ACE User Manual
38 © 2004 ADTRAN, Inc 61204025L1-1B
Figure 3-8. Four Opening Menus and First Level Submenus
Menu flow is normally depicted from left to right. Arrows on the lower right of the screen indicate the
direction of scrolling to view additional menu items. At every level of the menu, pressing the CANCEL
button returns the system to the previous menu level. Repeatedly pressing the CANCEL button returns the
system to the Main menu.
The opening menu is the access point to all other operations. There are four Main menu items: STATUS,
CONFIGURATION, UTILITY, and TEST. Each Main menu item has several functions and submenus to
identify and access specific parameters. In the discussions that follow, each Main menu item contains a
complete menu diagram to identify the location of each operation.
DETAILED MENU OPERATION
Menu flow is normally depicted from left to right. Arrows on the lower right of the screen indicate the
direction of scrolling to view additional menu items. At every level of the menu, pressing the CANCEL
button returns the system to the previous menu level. Repeatedly pressing the CANCEL button returns the
system to the Main menu.
1)STATUS
The Status menu branch lets you view the status of the T1 ESF CSU ACE operation. See Figure 3-9.
1)NI PERF RPTS
2)NI ERR/ALM
1)STATUS 3)NI HISTORY
4)T1 ERR/ALM
2)CONFIG 1)NETWORK (NI) 5)T1 HISTORY
2)UNIT
MAIN MENU 3)TERMINAL (T1)
1)SOFTWARE REV
3)UTIL 2)REINIT UNIT
3)ADDRESS:
4)TEST 1)LOCAL LOOPBK: 4)SET PASSCODE:
2)REM LB: 5)FACT RESTORE
3)TEST PATTERN: 6)REMOTE T-WATCH
4)RUN SELFTEST
