RackSwitch G8000 Application Guide
100
Chapter 6: Quality of Service BMD00041, November 2008
ACL configuration examples
Example 1
Use this configuration to block traffic to a specific host. All traffic that ingresses port 1 is
denied if it is destined for the host at IP address 100.10.1.1
1. Configure an Access Control List.
2. Assign the ACL to port 1.
3. Verify the configuration.
RS G8000 (config)# access-list ip standard 1
RS G8000 (config-std-nacl)# deny any host 100.10.1.1
RS G8000 (config-std-nacl)# exit
RS G8000 (config)# interface port 1
RS G8000 (config-if)# ip access-group 1 in
RS G8000 (config-if)# exit
RS G8000# show access-list 1
Standard IP Access List 1
----------------------------
Source IP address : 0.0.0.0
Source IP address mask : 0.0.0.0
Destination IP address : 100.10.1.1
Destination IP address mask : 255.255.255.255
In Port List : 1
Out Port List : NULL
Filter Action : Deny
User Priority : Nil
Statistics : Disabled
Status : Active
