RackSwitch G8000 Application Guide
28
Chapter 1: Accessing the Switch BMD00041, November 2008
RADIUS authentication features in Blade OS
Blade OS supports the following RADIUS authentication features:
Supports RADIUS client on the switch, based on the protocol definitions in RFC 2138 and
RFC 2866.
Allows RADIUS secret password up to 32 bytes and less than 16 octets.
Supports secondary authentication server so that when the primary authentication server
is unreachable, the switch can send client authentication requests to the secondary authen-
tication server. Use the following command to show the currently active RADIUS authen-
tication server:
Supports user-configurable RADIUS server retry and time-out values:
Time-out value = 1-10 seconds
Retries = 1-3
The switch will time out if it does not receive a response from the RADIUS server in 1-3
retries. The switch will also automatically retry connecting to the RADIUS server before it
declares the server down.
Supports user-configurable RADIUS application port.
The default is 1812/UDP-based on RFC 2138. Port 1645 is also supported.
Allows network administrator to define privileges for one or more specific users to access
the switch at the RADIUS user database.
RS G8000 (config)# show radius-server
