11.47
Installing timing case cover
•
Apply a thin coat of 3-Bond 1209 to the sealing
faces, which must be free from oil and grease.
•
Pass the wires for the telltale lights (oil pressure,
coolant temperature) through the cable duct (ar-
row).
•
Place the timing case cover in position and tight-
en it.
X Tightening torque:
Timing case cover..........................................7 Nm
Installing hall-effect transmitter
•
Screw adjusting disc (1) and gate rotor (2) to the
crankshaft.
X Tightening torque:
Gate rotor ................................................... 2.5 Nm
•
Insert baseplate (3) for Hall-effect transmitter.
•
The cutouts in the baseplate and timing case
cover should coincide.
•
Insert the retaining screws with shim washer and
semi-circular washer (4).
X Tightening torque:
Baseplate....................................................... 6 Nm
3
1
2
4
LT110701
