A SERVICE OF

logo

xx About This Guide
Required Tools
You’ll need the following tools to service the controller, cache module, external cache
battery (ECB), the Power Verification and Addressing (PVA) module and the I/O
module:
A flathead screwdriver for loosening and tightening the I/O module retaining
screws.
A small phillips screwdriver for loosening and tightening the GLM access door
screws.
An antistatic wrist strap.
An antistatic mat on which to place modules during servicing.
A Storage Building Block (SBB) Extractor for removing StorageWorks building
blocks. This tool is not required, but it will enable you to perform more
efficiently.