A SERVICE OF

logo

CDP Interoperability Commands 251
show isdp neighbors
The show isdp neighbors command displays the list of neighboring devices.
Syntax
show isdp neighbors {ethernet
interface
| detail}
interface
— Specifies a valid interface. The full syntax is unit/port.
detail
— Show detailed information about the neighbors.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show isdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source
Route,
S - Switch, H - Host, I - IGMP, r - Repeater
Device ID Intf Hold Cap. Platform Port
ID
-------------------- ----- ---- ------- ----------------- -
-------------------
Switch 1/g1 165 RI cisco WS-C4948
GigabitEthernet1/1