IGMP Snooping Commands 335
Default Configuration
IGMP snooping is disabled.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
IGMP snooping can be enabled on Ethernet interfaces.
Example
The following example enables IGMP snooping.
console(config-if-1/g1)#ip igmp snooping
ip igmp snooping host-time-out
Use the ip igmp snooping host-time-out command in Interface
Configuration mode to configure the host-time-out. If an IGMP report for a
Multicast group is not received for a host time-out period from a specific port,
this port is deleted from the member list of that Multicast group. To reset to
the default host time-out, use the no form of this command.
Syntax
ip igmp snooping host-time-out
time-out
no ip igmp snooping host-time-out
•
time-out
— Host timeout in seconds. (Range: 2- 3600)
Default Configuration
The default host-time-out is 260 seconds.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
