A SERVICE OF

logo

Open as PDF
next previous
396 LACP Commands
User Guidelines
This command has no user guidelines.
Example
The following example assigns an administrative LACP timeout for port 1/g8
to a long timeout value.
console(config)#interface ethernet 1/g8
console(config-if-1/g8)#lacp timeout long
show lacp ethernet
Use the show lacp ethernet command in Privileged EXEC mode to display
LACP information for Ethernet ports.
Syntax
show lacp ethernet
interface
[parameters|statistics]
•
Interface
— Ethernet interface.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to display LACP Ethernet interface
information.
console#show lacp ethernet 1/g1
Port 1/g1 LACP parameters:
Actor