xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
158
config bpdu_protection
attack_cleared - Events will be logged or trapped when the BPDU attacks is cleared.
both - The events of attack_detected and attack_cleared shall be trapped or logged.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To config the bpdu_protection trap state as both for the entire switch:
DGS-3627:admin# config bpdu_protection trap both
Commands: config bpdu_protection trap both
Success.
enable bpdu_protection
Purpose Used to enable bpdu_protection globally.
Syntax
enable bpdu_protection
Description The enable bpdu_protection command is used to enable bpdu_protection function globally for
the entire switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable bpdu_protection function globally for the entire switch:
DGS-3627:admin# enable bpdu_protection
Commands: enable bpdu_protection
Success.
disable bpdu_protection
Purpose Used to disalbe bpdu_protection globally.
Syntax
disable bpdu_protection
Description The disable bpdu_protection command is used to disable bpdu_protection function globally
for the entire switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable bpdu_protection function globally for the entire switch:
