xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
425
DGS-3627:admin# show lldp ports 1
Command: show lldp ports 1
Port ID : 1:1
-------------------------------------------------------------------
Admin Status : TX_and_RX
Notification Status : Disabled
Advertised TLVs Option :
Port Description Disabled
System Name Disabled
System Description Disabled
System Capabilities Disabled
Enabled Management Address
(None)
Port VLAN ID Disabled
Enabled Port_and_Protocol_VLAN_ID
(None)
Enabled VLAN Name
(None)
Enabled Protocol_Identity
(None)
MAC/PHY Configuration/Status Disabled
Link Aggregation Disabled
Maximum Frame Size Disabled
show lldp local_ports
Purpose Used to display the per-port information currently available for populating outbound LLDP
advertisements.
Syntax
show lldp local_ports {<portlist>} {mode [brief | normal | detailed]}
Description This command displays the per-port information currently available for populating outbound
LLDP advertisements.
Parameters
<portlist> – Use this parameter to define ports to be configured.
brief – Display the information in brief mode.
normal – Display the information in normal mode. This is the default display mode.
detailed – Display the information in detailed mode.
Restrictions None.
Example usage:
To display outbound LLDP advertisements for port 1:
