xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
206
Command Parameters
create dhcp pool
<pool_name 12>
delete dhcp pool
[<pool_name 12> | all]
create dhcp pool manual_binding
<pool_name 12> <ipaddr> hardware_address <macaddr> {type [Ethernet |
IEEE802]}
delete dhcp pool manual_binding
<pool_name 12> [<ipaddr> | all]
show dhcp pool manual_binding
{<pool_name 12>}
show dhcp_binding
{<pool_name 12>}
clear dhcp_binding
{<pool_name 12>}
config dhcp ping_packets <number 2-10>
config dhcp ping_timeout <millisecond 500-2000>
config dhcp pool boot_file
<pool_name 12> <file_name 64>
config dhcp pool default_router
<pool_name 12> <ipaddr> {<ipaddr>} {<ipaddr>}
config dhcp pool dns_server_address
<pool_name 12> <ipaddr> {<ipaddr>} {<ipaddr>}
config dhcp pool domain_name
<pool_name 12> <domain_name 64>
config dhcp pool lease <pool_name 12> [<day 0-365> <hour 0-23> <minute 0-59> | infinite]
config dhcp pool
netbios_name_server
<pool_name 12> <ipaddr> {<ipaddr>} {<ipaddr>}
config dhcp pool netbios
_node_type <pool_name 12> [broadcast | peer_to_peer | mixed | hybrid]
config dhcp pool network_addr
<pool_name 12> <network_address>
config dhcp pool next_server
<pool_name 12> <ipaddr>
enable dhcp_server
disable dhcp_server
show dhcp_server
create dhcp excluded_address
begin_address
<ipaddr> end_address <ipaddr>
delete dhcp excluded_address [begin_address <ipaddr> end_address <ipaddr> | all]
show dhcp excluded_address
show dhcp pool
{ <pool_name 12>}
Each command is listed in detail in the following sections.
