A SERVICE OF

logo

Open as PDF
next previous
3 - 2 Document #98210104
Step 3
The track assembly should be 1.975” away from
the pit wall. (closest to the 248 dyno)
Step 4
Line up the centerline of the track assembly with
the centerline of Model 248 Chassis Dyno.
Step 5
Check the square of the track assembly (measure
from corner to corner).
Note: Be sure that the track is fully seated
under the rail clamp.
See Figure 2 in Appendix A.
The distance between
the inside of the rails
should be:
72.5” + - 0.06”
72.5”
1.975”