A SERVICE OF

logo

3 - 16 Document #98210104
Step 3
Set up the “non-motor side” Grates in the same
fashion as did for the “motor-side” grates. Also,
attach the Center Plate, and then tighten
everything down when complete.
Step 4
Set up the side grates.
! Lay the side grates on the side of the dyno with
the bolt holes towards the outside. The side
grates should be oriented with a 1” gap
between the grates mounted to the dyno.
! Use concrete anchors to secure the side grates
to the concrete surrounding the dyno.
Note: Be sure that the side grates do not
touch the dyno or to the grates
mounted to the dyno.
Side Grate