C2657M-A (7/08) 16
PRIMARY FUNCTIONS
• Export: Opens the Export dialog box.
• Lock/Unlock Toggle: Locks select video from being deleted. Locked video left on the storage drives reduces the system storage capacity.
Unlocking removes the lock and allows video to be overwritten as part of the normal overwrite process. This toggle changes to Unlock if
you move your time line cursor above a locked clip.
– If the video clip is large, the cursor may change to a clock during the locking process.
– A white line and brackets reflect the time range for the locked video clip.
To lock a clip:
• Move the slider with the mouse [or Jog (inner dial)] to the beginning of the desired period, and then press Lock.
• Move the slider to the end time, and then press Lock again.
To unlock a locked clip:
• Position the slider on the locked clip (white line across the recording bar).
• Select Unlock
NOTE: As you set the start and end times, the values are displayed in the information bar at the bottom of the screen.
• Play: Starts to play back the video from the slider position along the time line. The camera, time, and date are displayed above the time
line. The dialog box remains open.
• Close: Closes the Quick Search dialog box. Video continues to play if you previously pressed Play. Otherwise, the video pane remains in
the same state as when the Quick Search dialog box was opened.
• More: Displays the secondary functions in the Quick Search dialog box (Enhanced Search, Mark, and Snapshot).
SECONDARY FUNCTIONS:
• Enhanced: Closes the Quick Search dialog box and opens the Enhanced Search dialog box (refer to Performing an Enhanced Search on
page 17).
• Mark:
– Places a mark on the video so that it can be located easily in a Quick or Enhanced Search.
– Updates the Quick Search graph to show the mark (star).
– Flashes a message on the information bar to confirm that the marking process is successful.
To mark video, select the time and camera, and then press Mark. A star appears indicating the marked video.
• Snapshot:
– Stores the snapshot (a still image) on an attached USB device using your default snapshot format.
– Flashes a message on the information bar to confirm the capture.
• More: Returns you to the primary Quick Search dialog box.
• Close: Closes the Quick Search dialog box.
• Export: Select Export to export the video to an external storage device.