ENWW Printing control-panel menu map 59
Resetting the HP Jetdirect print server
Resetting the HP Jetdirect print server restores the factory default values of the Jetdirect
print server.
Note When you restore the factory default values for the HP Jetdirect print server, all previously
stored EIO settings are lost.
To reset the HP Jetdirect print server
1 Press (Power button) to turn off the printer.
2 While holding (Back button) and (Resume button), turn on the printer.
Printing control-panel menu map
You can print a menu map of the settings that can be accessed through the control panel.
1 Press (Select button) on the control panel.
2 Press (Down Arrow button) to highlight INFORMATION, and then
press (Select button).
3 Press (Select button) to select PRINT MENU MAP.
Changing printer settings from the control panel
The control panel is one of three ways to set options in the printer. You can also change
options from the printer driver and the software applications from which you print. Printer driver
and application settings override control panel settings for the current print job. Application
settings override default printer driver settings.
Menu items in the control panel are numbered from 1 to 9. If a menu has more than nine
items, the additional items will appear with a letter value from A to Z. However, the numbers
and letter values are not included in the procedures in this guide.
For more information about any control panel menu or item, press (Help button).
To access the menus and settings
1 Press (Select button) on the control panel to enter the menus.
2 Navigate to the menu or submenu that contains the setting you want to change.
• Press (Down Arrow button) or (Up Arrow button) to highlight the desired menu.
(Hold down either of these buttons to auto-scroll through the selections.)
Press (Select button) to access the desired menu. Repeat this procedure to access
submenus.
• Press (Down Arrow button) or (Up Arrow button) to highlight the desired setting,
and then press (Select button) to save the setting. An asterisk (*) appears next to
the setting in the display, indicating that the new setting is now the default.
3 Press (Cancel button) to exit the menus and return the printer to the
READY state. If no
button is pressed for 30 seconds, the printer returns automatically to the
READY state.
