Envelopes
Guidelines
● Avoid using envelopes that have the following qualities:
❍ Have clasps or windows
❍ Have thick, irregular, or curled edges
❍ Are shiny or embossed
❍ Are wrinkled, torn, or otherwise damaged
● Align the envelope edges before inserting them in the In
tray.
● Do not exceed the In-tray capacity: up to 20 envelopes.
Preparing to print
If you are printing on a single envelope, use the
photo/envelope feeder.
If you are printing on multiple envelopes, follow these steps:
1. Verify that the printer is turned on.
2. Remove the Out tray, and then remove all paper from the
In tray.
3. Slide the paper-width guide all the way to the left, and then
pull out the paper-length guide.
4. Place the envelopes, with the sides to be printed on facing
down and the flaps to the left, into the In tray and to the
right. Push the envelopes into the printer until they stop.
