Resetting the printer to the factory
default settings
Once the printer is configured for a network, its configuration
settings are saved in its memory.
Resetting the printer to its factory default settings will clear
all the settings from the printer's memory for your network.
This should only be done as a last resort when
troubleshooting the printer.
Also, resetting the printer to its factory default settings
erases the
embedded Web server (EWS) administrator
password.
Resetting the printer to its factory default settings may
require you to reinstall the printer software. Additionally, you
will also have to reconfigure the printer's security settings.
Follow these steps to reset the printer to the factory default
settings:
1. Verify that the printer is powered on.
2. Press and hold down the Report Page button.
3. While holding down the Report Page button, press the
Cancel button three times.
4. Release the Report Page button.
