A SERVICE OF

logo

106 Removal and replacement EN
Feed Assembly
The Feed Assembly is located in the Paper Feed Frame.
1 Remove the Printer Covers, Pickup Roller Assembly (Figures 6-23 through 6-25), and Paper
Feed Frame (Figures 6-26 through 6-29).
2 Turn the Paper Feed Frame upside down.
3 Remove the Feed Roller Shaft by lifting the plastic tab up (Figure 6-35, callout 1) and sliding it
out the side of the Paper Feed Frame (Figure 6-35, callout 2).
Figure 6-35 Feed Assembly removal (1 of 3)
1
2
Service.book Page 106 Thursday, September 14, 2000 11:15 AM