DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Supplier’s name: Hewlett-Packard Company
Supplier’s address: Avda. Graells, 501
08174 Sant Cugat del Vallès
Barcelona, Spain
declares that the product
Regulatory Model
(3)
: BCLAA-0502 and BCLAA-0602
Product family: HP Designjet 8000s Printer series and HP Designjet 8000s Take-up Reel Kit
Product options: All
conforms to the following product specifications
Safety: IEC 60950-1:2001 / EN 60950–1:2001
EMC: CISPR 22:1997 +A1:2000 +A2:2002 / EN 55022:98 +A1:2000 +A2:2003 Class A
(1)(3)
EN 55024:1998 +A1:2001 +A2:2003
EN 61000-3-2:2000/ IEC 61000-3-2:2000
EN 61000-3-3:1995+A1:2001/ IEC 61000-3-3/A1:2001
FCC Title 47 CFR, Part 15 Class A
(2) (3)
Additional information
The product herewith complies with the requirements of the Low-Voltage Directive 73/23/EEC and the EMC
Directive 89/336/EEC, and carries the CE marking accordingly.
1. The product was tested in a typical configuration with HP Personal Computer systems and peripherals.
2. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
●
This device may not cause harmful interference.
●
This device must accept any interference received, including interference that may cause
undesired operation.
3. The product is assigned a Regulatory Model Number which stays with the regulatory aspect of the
design. The Regulatory Model Number is the main product identifier in the regulatory documentation
and test reports; this number should not be confused with the marketing name or the product numbers.
216 Chapter 19 Legal information ENWW
Legal information
