A SERVICE OF

logo

Open as PDF
next previous
4 Switch Interface Administration Digital Interfaces
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 184
2 Enter the circuit card number in the Card Number: field, or press F2
(Choices) to select from a menu. Initially, all fields are populated with the
default values for the circuit card number entered.
3 Change any of the parameters as described in Assigning an ISDN-PRI
Layer 1 to Digital Circuit Cards on page 175.
4 Press F3 (Save).
The system changes the specified parameters for the selected circuit
card.
Displaying ISDN-
PRI Layer 1
Parameters
The circuit card must first be assigned to the ISDN-PRI Layer 1 protocol to
use this procedure. See Assigning an ISDN-PRI Layer 1 to Digital Circuit
Cards on page 175 for more information about making the initial assignment.
To display the ISDN-PRI Layer 1 parameters:
1 Start at the ISDN-PRI Layer 1 menu (Figure 98 on page 175) and select:
> Display Parameters