210 Chapter 10
Scan test
Running est from command line
Table 82 est runtime option commands
Command Description
Default
argument
log_file Turn on/off writing to the log
file.
On
stop_on_error Stops the test when an error is
detected.
On
limit_patterns Runs a limited set of patterns
when testing arrays. This runs
faster, but reduces coverage.
Off
limit_errors Limits to 10 the max number of
errors that will get printed. The
total error count is still printed.
On
pass_fail When enabled, it prints the
pass or fail status of each test
pattern.
Off
test_file_msgs Debug option that enables
printing of gate array pattern
file information.
Off
show_scan_instr Show scan instructions when
running tests.
Off
show_scan_data Show scan data when running
tests.
Off
show_sdp Show SDP ethernet
information when running est.
Off
power_control Affects whether or not est
takes control of the power-down
signal in the utility system.
Turning this feature off could
result in unexpected power
shutdowns, but that may be
needed for some special debug
efforts.
On
