Chapter 2 31
Configuration management
ts_config
Step 4. Select an appropriate serial connection for the V2500 console from the
pop-down option menu in the node configuration panel.
ts_config automatically assigns the first unused serial port. If the
terminal mux has been configured, the terminal mux ports are included
in the list of available serial connections.
The IP address information for the Diagnostic interface is provided. The
ts_config utility automatically changes the IP address of the
diagnostic LAN interface to prevent a duplicate when other nodes are
added to this teststation configuration.
ts_config automatically updates the local /etc/hosts file with the
names and addresses of the Diagnostic and OBP LAN interfaces.
Step 5. Click “Configure.”
This updates several teststation files. The node configuration
confirmation panel appears as the one in Figure 13.
Figure 13 ts_config node configuration confirmation panel.
Step 6. Read the panel and click “OK.” When the configuration process is
complete, the “Configuration Status” of the node changes to “Active,” as
shown in Figure 14.
