68 Chapter 3
Power-On Self Test
Messages
Each character indicates the physical location of the DIMM and the
logical size of the DIMM. The memory information is encoded as follows:
Value Memory Type
. 32MB
: 64MB
| 128MB
_ Empty
# Hardware deconfigured
$ Software (user) deconfigured
For example:
r0 r1 r2 r3
PB0L_A MB0L [.... ....][.... ....][____ ____][____ ____]
PB1R_A MB1L [.... ....][.... ....][____ ____][____ ____]
PB2L_A MB2R [.... ....][.... ....][____ ____][____ ____]
PB3R_A MB3R [.... ....][.... ....][____ ____][____ ____]
PB4L_A MB4L [.... ....][.... ....][____ ____][____ ____]
PB5R_A MB5L [.... ....][.... ....][____ ____][____ ____]
PB6L_A MB6R [.... ....][.... ....][____ ____][____ ____]
PB7R_A MB7R [.... ....][.... ....][____ ____][____ ____]
Main memory initialization complete
This message indicates that a main memory initialization is complete.
For example:
Main memory initialization complete.
System control to boot client
This message indicates that system control is being handed off to the
specified boot client.
For example, one of the following:
Booting OBP
Booting DIAG
Booting SPSDV
Booting RDR dumper
