A SERVICE OF

logo

Chapter 2 27
Configuration management
ts_config
Upgrade JTAG firmware
Step 1. Select the node from the list in the display panel. For example, clicking
on node 0 in the list highlights that line as shown in Figure 6.
Figure 6 ts_config show node 0 highlighted
Notice that after the node has been highlighted that ts_config displays
information concerning the node. In this step, it tells the user what
action to take next, “This node’s JTAG firmware must be upgraded.
Select “Actions,” “Upgrade JTAG firmware” and “Yes” to upgrade.”
Step 2. Select “Actions” to drop the pop-down menu and then click “Upgrade
JTAG firmware,” as shown in Figure 7.