5/17/2007 page 114 of 138
Set VLAN to defaults
Command Name
vlan set default
Description Removes all the configured vlans and add all the ports under the Default
vlan.
Syntax
vlan set default
Parameters
None
Examples
N-TRON/Admin#[1]> vlan set default
NOTES Changing anything on a VLAN will turn on RSTP on all VLANS as a
precautionary measure.
Set VLAN Ingress Filter
Command Name
vlan set ingressfilter
Description Enables or Disables an inbound filter on specified ports that will throw out
any packet with the wrong VID in the VLAN tag on the packet.
Syntax
vlan set ingressfilter <enable|disable> <port-list|all>
Parameters
enable|disable
Enable or Disable the filter on the a specified port.
port-list|all
Enter a specific port number list or specify all ports
Examples
N-TRON/Admin#[1]> vlan set ingressfilter enable 1-6
N-TRON/Admin#[2]> vlan set ingressfilter enable all
NOTES The ingressfilter will automatically be turned on for tagged ports.
Get VLAN Ingress Filter
Command Name
vlan get ingressfilter
Description Gets inbound filter info on specified ports.
Syntax
vlan get ingressfilter <all|port-list>
Parameters
all|port-list
Enter a specific port number list or specify all ports
Examples
N-TRON/Admin#[1]> vlan get ingressfilter 1-6
NOTES
Get VLAN info
Command Name
vlan get info
Description Displays the current state of the configured vlans.
Syntax
vlan get info <vlanid>
Parameters
vlanid
Enter a specific VLan ID
Examples
N-TRON/Admin#[1]> vlan get info 1
NOTES
