WR3000 4-Port Wireless DSL/Cable Router
®
122
15.2 Confi guring Log Settings
The following table describes the labels in the screen on the preceding page.
Enter the server name or the IP address of the mail server for the e-mail
Enter the server name or the IP address of the mail server for the e-mail
addresses specifi ed below. If this fi eld is left blank, logs and alert messages will
Type a title that you want to be in the subject line of the log e-mail message that
Type a title that you want to be in the subject line of the log e-mail message that
the WR3000 Wireless Router sends.
Logs are sent to the e-mail address specifi ed in this fi eld. If this fi eld is left blank,
Logs are sent to the e-mail address specifi ed in this fi eld. If this fi eld is left blank,
logs will not be sent via e-mail.
Enter the e-mail address where the alert messages will be sent. Alerts include
system errors, attacks and attempted access to blocked web sites. If this fi eld is
left blank, alert messages will not be sent via e-mail.
UNIX syslog sends a log to an external UNIX server used to store logs.
Enter the server name or the IP address of the syslog server that will log the CDR
Enter the server name or the IP address of the syslog server that will log the CDR
(Call Detail Record) and system messages.
Select the Local from the drop down list box. The log facility allows you to log the
Select the Local from the drop down list box. The log facility allows you to log the
messages to different fi les in the syslog server. Refer to your UNIX manual for
This drop-down menu is used to confi gure the frequency of log messages being sent
This drop-down menu is used to confi gure the frequency of log messages being sent
Daily • Weekly • Hourly • When the Log is Full • None.
option is selected, specify a time of day when the E-mail
option is selected, then also specify which day of the
week the E-mail should be sent. If the
option is selected, an alert
is sent when the log fi lls up. If you select
is sent when the log fi lls up. If you select
no log messages are sent.
no log messages are sent.
This fi eld is only available when you select
This fi eld is only available when you select
Use the drop down list box to select which day of the week to send the logs.
Enter the time of the day in 24-hour format (for example 23:00 equals 11:00 pm) to
Enter the time of the day in 24-hour format (for example 23:00 equals 11:00 pm) to
Select the categories of logs that you want to record.
Select the categories of logs that you want to record.
Select the categories of alerts for which you want the WR3000 Wireless Router to
Select the categories of alerts for which you want the WR3000 Wireless Router to
immediately send e-mail alerts.
to save your changes back to the WR3000 Wireless Router.
to begin confi guring this screen afresh.
to begin confi guring this screen afresh.
