WR3000 4-Port Wireless DSL/Cable Router
®
64
8.2.2 PPPoE Encapsulation - Continued
The following table describes the labels in this screen.
ISP Parameters for Internet Access
ISP Parameters for Internet Access
ISP Parameters for Internet Access
ISP Parameters for Internet Access
choice is for a dial-up connection using PPPoE. The WR3000
choice is for a dial-up connection using PPPoE. The WR3000
Wireless Router supports PPPoE (Point-to-Point Protocol over Ethernet).
Type the PPPoE service name provided to you. PPPoE uses a service name to
Type the PPPoE service name provided to you. PPPoE uses a service name to
identify and reach the PPPoE server.
Type the username given to you by your ISP.
Type the username given to you by your ISP.
Type the password associated with the user name above.
Type your password again here to ensure that what you entered in the
fi eld above was what you intended.
if you do not want the connection to time out.
if you do not want the connection to time out.
Specify the time in seconds that elapses before the WR3000 Wireless
Specify the time in seconds that elapses before the WR3000 Wireless
Router automatically disconnects from the PPPoE server.
Click Apply to save your changes back to the WR3000 Wireless Router.
Click Apply to save your changes back to the WR3000 Wireless Router.
Click Reset to begin confi guring this screen afresh.
Click Reset to begin confi guring this screen afresh.
WIZARD
Back Next
PPP over Ethernet
ISP Parameters for Internet Access
Encapsulation
Service Name
Password
Nailed-Up Connection
Idle Timeout
100
(In Seconds)
User Name
