A – Command Line Interface
Set Config Command
A-30 59022-06 A
Q
ALFairness Arbitration loop fairness. Enables (True) or
disables (False) the switch’s priority to
arbitrate on the loop. The default is False.
DeviceScanEnabled Enables (True) or disables (False) the
scanning of the connected device for FC-4
descriptor information during login. The
default is True.
ForceOfflineRSCN Enables (False) or disables (True) the
immediate transmission of RSCN
messages when communication between
a port and its device is interrupted. If
enabled, the RSCN message is queued
for 200 ms. The default is False. This
parameter is ignored if IOStreamGuard is
enabled.
ARB_FF Send ARB_FF (True) instead of IDLEs
(False) on the loop. The default is False.
InteropCredit Interoperability credit. The number of
buffer-to-buffer credits per port. 0 means
the default (12) is unchanged.
ExtCredit Extended credits. The number of port
buffer credits that this port can acquire
from donor ports. The default is 0.
FANEnable Fabric address notification. Enables (True)
or disables (False) the communication of
the FL_Port address, port name, and node
name to the logged-in NL_Port. The
default is True.
LCFEnable Link control frame preference routing.
Enables (True) or disables (False)
preferred routing of frames with R_CTL =
1100 (Class 2 responses). The default is
False. Enabling LCFEnable will disable
MFSEnable.
MFSEnable Multi-Frame Sequence bundling. Prevents
(True) or allows (False) the interleaving of
frames in a sequence. The default is True.
Enabling MFSEnable disables LCFEnable
and VIEnable.
Table A-9. Set Config Port Parameters (Continued)
Parameter Description
