4 – Managing Switches
Configuring a Switch
59022-10 A 4-19
0
4.7.2
Switch Properties
To open the Switch Properties dialog, either select a switch in the topology display
or open the faceplate display for the switch you will be configuring, and then open
the Switch menu and select Switch Properties. You may also right-click a switch
graphic in the topology display or faceplate display, and select Switch Properties
from the popup menu. Use the Switch Properties dialog to change the following
switch configuration parameters:
Symbolic Name
Switch Administrative States
Domain ID and Domain ID Lock
Fabric Device Management Interface
Broadcast Support
Broadcast Support
Interop Mode for Zoning
Legacy Port Address Format
Timeout Values
The timeout values are displayed only for reference purposes when the switch is
online; they become active when the switch is taken offline. After making changes,
click the OK button to put the new values into effect.
Figure 4-10. Switch Properties Dialog
