4 – Managing Switches
Displaying Switch Information
59022-10 A 4-9
0
4.2.2
Switch Data Window
The Switch data window displays current network and switch information for the
selected switches. Refer to ”Configuring a Switch” on page 4-18 for more
information about the Switch data window. To open the Switch data window, select
one or more switches in the topology display or open the faceplate display, and
click the Switch tab below the window. Ta ble 4-2 describes the Switch data
window entries.
Table 4-2. Switch Data Window Entries
Entry Description
First Port Address Switch Fibre Channel address
World Wide Name Switch World Wide Name
Serial Number Number assigned to each chassis.
Reason for Status Additional status information
User Name Account name
Login Level Authority level
Super User Super user privileges enabled/disabled
UserAuthentication
Enabled
Enforcement of account names and authority (always
True)
Vendor Switch manufacturer
Firmware Version Active firmware version
Inactive Firmware Version This field does not apply to this switch
Pending Firmware Version Firmware version that will be activated at the next reset
PROM/Flasher Version PROM firmware version
MAC Address Media Access Control address
IP Address Internet Protocol address
Subnet Mask Mask that determines the IP address subnet
Gateway Gateway address
SNMP Enabled SNMP enabled or disabled.
Negotiated Domain ID The domain ID currently being used by the fabric
Configured Domain ID The domain ID defined by network administrator
