59022-10 A 1-1
Section 1
Introduction
This manual describes the switch management tools which include the SANsurfer
Switch Manager™ application (version 4.02) and the Command Line Interface
(CLI) for the (firmware version 4.2). The SANsurfer Switch Manager switch
management application is the primary focus of this manual which is organized as
follows:
Section 1 describes the intended audience for this manual, related
materials, and technical support.
Section 2 describes how to use SANsurfer Switch Manager, its menus, and
its displays.
Section 3 describes fabric management tasks.
Section 4 describes switch management tasks.
Section 5 describes port and device management tasks.
Appendix A describes the command line interface.
A glossary of terms and an index are also provided.
1.1
Intended Audience
This manual introduces the switch management products and explains their
installation and use. It is intended for users responsible for installing and using
switch management tools.
1.2
Related Materials
Refer to the following manuals for information about switch hardware and
installation.
SANbox2-8c Fibre Channel Switch Installation Guide, publication number
59042-07 Rev. A.
SANbox2-16 Fibre Channel Switch Installation Guide, publication number
59021-10 Rev. A.
