31
3-2 Connections and Settings
Chapter 3 Preparations
For the method of transferring video/audio signals (AV/C data) to a nonlinear
editing system, refer to the manual provided with the editing software to be used.
3-2-2 Connecting to a Computer (FAM connection)
By connecting this unit to a computer with an FAM (file access
mode) connection, you can use the utility software (see page 46), and
the PDZ-1 Proxy Browsing Software.
The following figure shows an example connection.
• The FAM driver (see page 29) must be installed in advance.
• Connect only one PDW-D1 unit to a single computer.
Notes
1
PDW-D1
S400 (i.LINK)
-AC IN
DC IN
S400
1: i.LINK cable (not supplied)
To i.LINK(IEEE1394) connector
Laptop computer (with editing
software supporting DVCAM
format installed)
In the PC operation settings dialog box of the
utility software, in the FAM operation
section, set “Login” to “Inhibit” (see page 48).
