Chapter
5
46
5-1 Starting and Exiting
Chapter 5 Using the Utility Software
Using the Utility
Software
The utility software allows you to carry out
the following functions on this unit.
• Displaying device information
• Changing settings
• Disc operations
For details of installation of the utility software, see
page 29.
• When the utility software is running, it is
not possible to start other application
software
1)
using FAM (file access
mode).
Finish work with the utility software, and
close the utility software.
• When the utility software is running, this
unit is connected to the computer with an
FAM connection.
To switch to an AV/C connection, finish
work with the utility software, and close
the utility software.
• During disc access (when the ACCESS
indicator is lit), it is not possible to start
the utility software.
Start the program once disc access is
completed.
1) PDZ-1 Proxy Browsing Software
5-1 Starting and
Exiting
5-1-1 Starting
First make sure that this unit is connected to
the computer.
For connection details, see 3-2-2 “Connecting to a
Computer (FAM connection)” (page 31).
To start the utility software, with the
computer connected to this unit, carry out
any of the following.
• Open the folder in which the utility
software is installed, then double-click
on PC_Utility.exe.
• Click the Start button, then select Run,
and enter the path and name of the PC
Utility executable file (PC_Utility.exe),
then click the OK button.
This displays the home window of the
utility software.
English is selected as the factory default
setting for the language used. You can
change this as required (see page 48).
5-1-2 Exiting
Click the × (close) button in the top right
corner of the window.
Notes
Note
