54
5-3 Details of Functions
Chapter 5 Using the Utility Software
Owner information setting
operations
To enter owner information: Using the
keyboard, enter alphanumeric
characters in the edit box for each item.
If an entry is less than four bytes, the
remainder is filled with space
characters (20h).
To enter the country code by selecting
from a list: On the right of the edit
box, click the ... button, to open a
country selection dialog box. Select a
country by name from the list in this
dialog box, and click the 3-character or
2-character button.
To save the changed settings: Click the
Set button.
To discard the changed settings: In the
tree display, select a different setting
item.
Battery mode settings
Set the following items relating to the
battery pack loaded in this unit.
In the Settings/display contents column of
the table, underlined values indicate the
factory default settings.
The unit is shipped with the settings for BP-
GL95 or BP-GL65 battery packs.
For the BP-L60 series and BP-IL75, the
following settings are recommended:
• BEFORE END: 11.4V
• END: 11.2V
For details of the settings, see “AV setting
operations” (page 52).
Saving and recalling setup
You can save the current setting values of
the setup menu (AV, owner, and battery
mode settings) in any of menu banks 1 to 3
(memory regions for setting values), and
can recall them as required.
Procedure for saving and recalling
setup
To save the current setting values: Select
one of menu banks 1 to 3 from the
drop-down list, and click the Save
button.
To recall saved values: Select one of menu
banks 1 to 3 from the drop-down list,
and click the Recall button.
Date and time setting
Set the following items for the internal
clock in this unit.
Item name Settings/display
contents
SETUP
BATTERY END
Set the voltage
warning level just
before the battery
ends and the voltage
level at which the
battery ends.
Sub-item
1BEFORE
END
11.0 V to 13.8 V
to
14.5 V: Used
when a battery
pack is used. Set
the voltage
warning level just
before the battery
ends (in 0.1V
steps).
2END 11.0 to 13.3 V to 14.5
V: Used when a
battery pack is
used. Set the
voltage level at
which the battery
ends and the unit
stops operation,
just before the
battery ends (in
0.1V steps).
INFORMATION Displays battery
information.
Item name Settings/display
contents
