52
5-3 Details of Functions
Chapter 5 Using the Utility Software
Indication that a setting is at the
factory default value
When a setting is at the factory default
value, a colon (‘:’) appears between the
item name and the setting value.
When the setting has been changed, this
changes to a dot (‘.’).
Example: PREROLL TIME : 5 SEC
(setting is factory default)
PREROLL TIME . 8 SEC (setting has
been changed)
AV setting operations
To move from one menu item to another:
Use the V/v buttons, or the up and
down arrow keys on the keyboard.
To move from one menu level to another:
Use the B/b buttons, or the left and
right arrow keys on the keyboard.
To change the setting value: With the
cursor on the setting value, use the V/v
buttons, or the up and down arrow keys
on the keyboard. (Factory default
settings are shown with an asterisk
(*).)
To return a setting to its factory default
value: In the setting value selection
screen, click the Reset button.
To return all settings to their factory
default values: In the menu item
selection screen, click the Reset
button.
To save the changed settings: Click the
Set button.
To discard the changed settings: Click the
Cancel button, or press the Esc key on
the keyboard.
To change the line mode setting
1 Refer to “AV setting operations”
(previous item), and change the line
mode setting.
2 Press the Set button.
If a disc is present, it is automatically
ejected.
IMX DATA
LENGTH
When “IMX50,”
“IMX40,” or “IMX30” is
selected in setup
menu item
“RECORDING
FORMAT,” select the
audio quantization bit
count and number of
recording channels.
16bit × 8ch
: 16 bits ×
8 channels
24bit × 4ch: 24 bits ×
4 channels
When “RECORDING
FORMAT” is set to
“DVCAM,” the setting
is automatically fixed
at 16 bits × 4 channels.
Recording format setting
Item name Settings
RECORDING
FORMAT
Select the recording
format.
IMX50: MPEG IMX 50
IMX40: MPEG IMX 40
IMX30: MPEG IMX 30
DVCAM
: DVCAM
Line mode setting
Item name Settings
525/625
SYSTEM
SELECT
Switch between 525-
line and 625-line
modes.
525: 525-line mode
(NTSC)
625: 625-line mode
(PAL)
AUDIO CONTROL
Item name Settings
Note
