Rev. 1.00
(pL + pH × 256) = 5 (pL = 5, pH = 0)
m = 112
0 ≤ (aL + aH × 256) ≤ 65535 (0 ≤ aL ≤ 255, 0 ≤ aH ≤ 255)
0 ≤ (bL + bH × 256) ≤ 65535 (0 ≤ bL ≤ 255, 0 ≤ bH ≤ 255)
aL = 141, aH = 0 (BM height(top of a BM ~ bottom of BM): 20 mm)
bL = 20, bH = 11 (BM interval(top of a BM ~ top of next BM): 400 mm)
▪ This command sets the black mark paper format.
- pL, pH specifies (pL + pH × 256) as the number of bytes after pH (m,
aL, aH,bL, bH).
- aL, aH specifies [(aL + aH × 256) × vertical motion units] as the BM
height.
- bL, bH specifies as [(bL + bH × 256) × vertical motion units] as the BM
interval.
▪ The available BM height ranges from 4 to 20 mm.
▪ If the BM height specified is out of range, this command is ignored.
▪ The BM interval ranges from 40 to 400 mm.
▪ If the BM interval specified is out of range, this command is ignored.
