A SERVICE OF

logo

ZQ110
Rev. 1.00
- 93 -
Mobile Printer Command Manual
WLAN configuration
[Name]
[Description]
WLAN configuration command
Start Message is necessary before sending command via USB interface.
Start Message
Value
Direction
Message
7FH, 1DH, 1FH, 03H
Host → Printer
Response
7FH, 03H
Printer → Host
When sending the Configuration command to the printer via USB
interface, all Bytes should be converted to 2 Bytes data.
- For example, When sending _1A command,
Character
Hexadecimal
Divide
2 Byte data
_
0x5F
5, F
35H, 46H
1
0x31
3, 1
33H, 31H
A
0x41
4, 1
34H, 31H
[0x03] 1Byte should be added to last command
* When using WLAN for configuration, Start Message and 2Bytes data
converted from 1byte are not necessary.