Zebra Technologies ZQ110 Manual

A SERVICE OF

next previous

ZQ110

Rev. 1.00

- 59 -

Mobile Printer Command Manual

GS ( E

[Name]

[Description]

[Notes]

Set NV user memory area

This command stores the customized values to the NV user memory area

and uses them for the printer operation. The table below explains the

functions available in this command. Execute commands related to the

user setting mode by specifying the function code fn.

fn

Format

No.

Function

1

GS ( E pL pH fn d1 d2

1

Start the user setting mode

2

GS ( E pL pH fn d1 d2 d3

2

End the user setting mode

(Performs a soft reset)

3

GS ( E pL pH fn [a1 b18...b11]...

[ak bk8...bk1]

3

Set value(s) for the memory

switch

4

GS ( E pL pH fn a

4

Transmit the settings of the

memory switch to the host

▪ pL, pH is used to set the number of bytes following pH to (pL + pH x 256).

▪ The change in the items of the NV user memory is available only after

entering the user setting mode.

▪ After completing the user setting mode (Function 2), the printer performs

a software reset to restore the initial settings in effect at power on. The

receive and print buffers are cleared as well.

▪ Since frequent write operation by this command may deteriorate the

performance of the NV memory, it is recommended to write to NV memory

only when a significant change in the setting is required.

▪ While processing this command, the printer remains busy. Therefore the

data transmission by the host is not available. The real time commands and

ASB operations are not processed.